Page 1 of 2

Quick question

PostPosted: Wed Apr 06, 2011 9:36 pm
by Johno6
The new place I just moved into has a double garage with electric doors.
We have two controllers for them but they both open same door.
Any idea why this is or if there's anyway to change
It's a glideroll garage. The controls have 3 buttons
2 small 1 large but only the large one does anythin



Any help apprecriated

Re: Quick question

PostPosted: Wed Apr 06, 2011 9:40 pm
by White Line Fever
check the dip switches.
Open up controller and you will see 4 little switches.
Make sure they are in the same position as the reciever in motor and vice versa for other door but change the configuration.
(ie one switch up all others down)
Then the transmittor & reciever only respond to set switches.

Hope this helps makes sense in my head lol

Re: Quick question

PostPosted: Wed Apr 06, 2011 9:57 pm
by Johno6
I couldn't even find any dip switches.
In the controller on keys or the one with dollar door

Re: Quick question

PostPosted: Wed Apr 06, 2011 10:09 pm
by White Line Fever
hmmm... Flat batteries?
Sounds like you might need to get them re-programmed.

Expensive too shop around.

Re: Quick question

PostPosted: Wed Apr 06, 2011 10:16 pm
by Johno6
Batteries are fine coz both controllers work but for the same roller door.

Re: Quick question

PostPosted: Wed Apr 06, 2011 10:21 pm
by JK
Sounds just like ours Johno .. Pull the cover off the receiver and there should be a "learn" button and some dip switches

Re: Quick question

PostPosted: Wed Apr 06, 2011 10:33 pm
by Johno6
I seriously can't see any dip switches or a learn button.
Just a lot of stuff that I dunno wat it is

Re: Quick question

PostPosted: Wed Apr 06, 2011 11:22 pm
by Footy Chick
Umm...guys... :roll:


This is JOHNO and you're asking him to FIND something... :shock:

Re: Quick question

PostPosted: Thu Apr 07, 2011 12:02 am
by dedja
Just leave the doors up all the time mate ...

Re: Quick question

PostPosted: Thu Apr 07, 2011 9:18 am
by Brodlach
Footy Chick wrote:Umm...guys... :roll:


This is JOHNO and you're asking him to FIND something... :shock:




He got lost on the way to the Control Box and is actually looking at his water meter.

Re: Quick question

PostPosted: Thu Apr 07, 2011 9:20 am
by Johno6
this makes a lot of sense now....

i was wondering why my roller door had a hot and cold section. :?

Re: Quick question

PostPosted: Thu Apr 07, 2011 10:06 am
by stampy
White Line Fever wrote:hmmm... Flat batteries?
Sounds like you might need to get them re-programmed.

Expensive too shop around.


not if he is renting

Re: Quick question

PostPosted: Thu Apr 07, 2011 10:09 am
by Johno6
Not renting. Just bought

Re: Quick question

PostPosted: Thu Apr 07, 2011 12:40 pm
by mighty_tiger_79
congratulations johno

Re: Quick question

PostPosted: Thu Apr 07, 2011 12:47 pm
by Choccies
Just make sure your car is parked on that side. No problem then !!

Re: Quick question

PostPosted: Thu Apr 07, 2011 2:50 pm
by Johno6
thanks mt!! loving it atm!!!

and choccies misses called dibs before i even know which side worked

Re: Quick question

PostPosted: Thu Apr 07, 2011 2:52 pm
by mighty_tiger_79
so when is the housewarming? :lol:

Re: Quick question

PostPosted: Thu Apr 07, 2011 3:05 pm
by Johno6
haha we wanna paint the whole house so not for a while prob.

if ya want ill draw u all a map on how to get there......

happy with how the house is lookin already tho..

p.s i finally found some thing on the net on how to do the roller door. so i will try it out tonight after footy training and give it a shot.

Re: Quick question

PostPosted: Thu Apr 07, 2011 3:31 pm
by Zelezny Chucks
painting the house AFTER the housewarming would make more sense to me... :twisted:

Re: Quick question

PostPosted: Thu Apr 07, 2011 3:32 pm
by JK
Johno6 wrote:and choccies misses called dibs before i even know which side worked


That must come as a shock to Choccies, at least he'll have his garage all to himself